The White House had its first indoor water closets under Thomas Jefferson, who served from 1801 to 1809, but it did not have running water until 1833, and its first modern bathroom with hot and cold water arrived in 1853. So when the White House got flush toilets depends on what you count as a flush toilet. This article sets out the history of White House toilets and indoor plumbing, shows where the sources agree, and says plainly where they do not.
What is the timeline of White House plumbing?
- 1801 to 1809: Jefferson has two water closets installed upstairs, supplied by a cistern in the attic.
- 1825 to 1829: John Quincy Adams has a pump installed that draws water from a well near the Treasury Building, for the grounds.
- 1833: Under Andrew Jackson, running water reaches the house and a bathing room is added in the East Wing.
- 1853: Franklin Pierce’s presidency brings a second-floor bathroom with hot and cold running water.
- 1876: A 2,000-gallon tank in the attic supplies water throughout the house.
When did the White House get its first toilets?
The earliest indoor toilets came during Jefferson’s presidency. The White House Historical Association reports that Jefferson had two water closets installed upstairs, one at each end of the house. A water closet is an early indoor toilet that uses water to carry waste away. According to the association’s page on when the White House first got plumbing and to The Saturday Evening Post, the water came from a cistern in the attic and traveled through wooden pipes to the two fixtures.
Neither source gives a precise year, only that the work took place during his two terms, so this article places it within his presidency and no more exactly than that. The Saturday Evening Post also notes that the cistern came before running water reached the house, which is an important detail. These were early White House bathrooms in the simplest sense: a toilet fed by stored water, not by running water.

How did the White House get its water before 1833?
Not through pipes. During the presidency of John Quincy Adams, from 1825 to 1829, an iron garden pump with nine spouts was connected to a well at the nearby Treasury Building. The White House Historical Association says it supplied water to the grounds, and the Arkansas Democrat-Gazette describes it as used only to water the garden. The Saturday Evening Post adds that water for the house had to be brought over from the Treasury Building.
For a look at how ordinary people managed washing in an earlier age, see how people in the 1500s showered.
When did running water arrive at the White House?
Running water arrived in 1833, during Andrew Jackson’s presidency. The White House Historical Association records that iron pipes were installed in the Ground Floor Corridor, along with a bathing room in the East Wing. The Saturday Evening Post and the Arkansas Democrat-Gazette both place the arrival of running water in the same year.
Even then, comfort was limited. In its account of White House improvements in the 1850s, the association explains that bathing on the second floor still relied on portable tubs, with kettles of hot water carried up from the bathing room in the East Wing. Running water in the house did not yet mean a bathroom beside the family’s bedrooms.
When did the White House get its first modern bathroom?
The first modern bathroom came in 1853, under Franklin Pierce. The association describes a second-floor bathroom with the first permanent bathing facilities, with hot and cold water piped in, and says Pierce made significant improvements to the plumbing and toilet facilities. The Saturday Evening Post agrees that 1853 brought the first central plumbing, which served only the second floor and had both hot and cold taps.
Plumbing then grew in stages. In 1876, according to both the association and the Post, a 2,000-gallon tank was installed in the attic to supply water throughout the building. That date marks the point at which water reached the whole house and not only a single floor.
Which president installed the first flush toilets at the White House?
Here the sources disagree, and that is worth saying openly. The Saturday Evening Post dates the first flushable toilet to 1853. The Arkansas Democrat-Gazette reports that the Chicago Tribune credited Millard Fillmore with installing the first flush toilets that year. The White House Historical Association, meanwhile, credits Franklin Pierce with the plumbing and toilet improvements of 1853, and credits Jefferson with the earlier water closets. Fillmore’s term ended in March 1853 and Pierce’s began the same month, which helps explain the confusion over who deserves the credit.
Because the accounts name different presidents, this article does not choose one. A fair summary is that the White House had indoor water closets from the Jefferson era, running water from 1833, and a modern bathroom with a toilet and hot and cold running water from 1853.
What was left out, and why?
Several popular stories about the White House bathrooms history rest on a single source, or on a source that treats them as legend, so they are left out here. They include the often-repeated tale that Fillmore installed the first bathtub, the story of an oversized tub built for William Howard Taft, and details of twentieth-century modernization that appear in only one account. The exact year of Jefferson’s water closets is also omitted, because the sources do not give one. As with our look at washing clothes before machines, the evidence is strongest where independent sources agree.
Frequently asked questions
When did the White House get indoor plumbing?
It came in stages. Water closets supplied from an attic cistern were installed under Jefferson, running water arrived in 1833, and central plumbing with hot and cold taps reached the second floor in 1853.
Did Thomas Jefferson install toilets at the White House?
Yes. The White House Historical Association says he had two water closets installed upstairs, one at each end of the house. The sources do not give the exact year.
When did the White House get running water?
In 1833, under Andrew Jackson, when iron pipes were installed and a bathing room was added in the East Wing.
Who built the first modern bathroom at the White House?
The White House Historical Association credits Franklin Pierce with the second-floor bathroom of 1853, which had hot and cold running water. One newspaper account credits Millard Fillmore with the first flush toilets that year, so the credit is not fully settled.
If you enjoy history like this, browse more in our History, Buildings and Facts sections and subscribe to Mr Global Rankss on YouTube (https://www.youtube.com/@mrglobalrankss) for more science, history and rankings.
Related reading: How Did People in the 1500s Shower? and How Did People Wash Clothes Before Washing Machines?
Sources
- White House Historical Association: When did the White House first get plumbing?
- White House Historical Association: Jefferson’s White House upgrades
- White House Historical Association: White House improvements in the 1850s
- The Saturday Evening Post: The 9 Best Upgrades Made to the White House
- Arkansas Democrat-Gazette: White House, technology share history

Leave a Reply